neon1028

Item #: SCP-NUMBER

Object Class: Safe

Special Containment Procedures: SCP-NUMBER is to be fixed to a gird of 2mm wide bands spaced 2 cm apart contained in a 15cm x 10cm x 5cm case constructed of entirely of tin. SCP-NUMBER and it's container are to be stored in Site-17's Secure Item Storage Unit when not released for testing. Site personal are to survey SCP-NUMBER once per week. If SCP-NUMBER's container is found to be exhibiting any anomalous behavior site administration is to be contacted immediately.

All instances of SCP-NUMBER-1 are to be held for observation for anomalous behavior over a period of one week then incinerated.

Site personal with level 1 or greater security clearance are permitted to request SCP-NUMBER for testing [See addendum NUMBER.1]

Description: SCP-NUMBER is a 9cm by 6cm adhesive sticker with a red border and text reading "FURTHER TESTING NEEDED". SCP-NUMBER is immune to any damage from heat up to 900K, harsh chemicals, or mechanical forces. The adhesive of SCP-NUMBER has been shown to leave residue on surfaces SCP-NUMBER is applied to, but does not appear to diminish over repetitive application and removal. The chemical makeup of the adhesive is inline with standard commercial grade adhesives, though no manufacturer has been identified. The composition of SCP-NUMBER has not been properly tested due to it's seeming indestructible nature.

The anomalous behavior of SCP-NUMBER will only manifest when at least fifty percent (50%) of SCP-NUMBER's adhesive back comes in contact with a single object. Once in place, the object will start to display anomalous properties becoming an instance of SCP-NUMBER-1. Once SCP-NUMBER is removed the instance of SCP-NUMBER-1 will return to it's natural, non-anomalous state.

The anomalous properties of an SCP-NUMBER-1 instance are unique to the original object. In the case of simple object, with regular shapes and made from a single substance, these properties are consistent in regards to the substance, but can have greater effect relative to SCP-NUMBER-1's mass. In the cases where the original object is more complex, such as manufactured products or living being, the anomalous properties can vary greatly. The location or orientation of SCP-NUMBER do not seem to effect the resulting properties. As of this report no instance of SCP-NUMBER-1 have show signs of anomalous behavior after the removal of SCP-NUMBER.

A record of all documented test preformed with SCP-NUMBER are listed below.

+ RAW MATERIAL REPORTS

Test A - 2012, 10 21
Procedure: SCP-NUMBER is placed onto 20cm x 20cm x 2cm plates of various raw materials.

Material of plate	Observed anomalous reaction
Iron	SCP-NUMBER is adhered to the plate. The plate began to emit a strong magnetic force in a sphere 10 m in diameter. Other ferromagnetic objects in the testing room are pulled to the plate. Contact with these other objects had no effect on the magnitude of force emitted from the plate. SCP-NUMBER is removed and the iron plate returns to it's non-anomalous state.
Copper	SCP-Number is adhered to the plate. The plate begins to reduce in weight at a rate of 356 grams per second. At t+6:06 the plate is shown to have zero weight, but stills displaces normal mass in regards to momentum and other physical interactions. At t+20:12 the plate has a weight of -1.784kg, reduction of weight has stopped. The plate is recovered from the ceiling of the testing room and SCP-NUMBER is removed. The copper plate returns to it's non-anomalous state.
Tin	SCP-NUMBER is adhered to the plate. The plate began to emit a high pitch tone of around 2,035Hz. This tone continues with no change until t+20:00 when SCP-NUMBER is removed. The tone stops and the tin plate returns to it's non-anomalous state.
Zinc	SCP-NUMBER is adhered to the plate. The plate begins to form branch like protrusions from sides of the plate perpendicular to SCP-NUMBER. The mass of the plate remains unchanged showing these branches are being created of displacement of mater within the plate. At t+3:36 the branches begin to move. They are shown to move towards neutral stimuli such as magnetic fields or other materials in the testing room, and away from negative stimuli such as extreme heat in the form of a blow torch. At t+24:41 the plate has been reduced to a cylinder 10cm in diameter and 2cm thick with branches extending from all sides. The branches begin to push off of the testing table seemingly in an attempt at locomotion. SCP-NUMBER is removed. The plate retains it's new form, but no motion is observed and is concluded to be in a non-anomalous state.