rating: 0+x


Item #: SCP-XXXX

Object Class: Safe

Special Containment Procedures: SCP-XXXX is located at Site-76 in a ?x?x? hazardous chemical containment unit when not being researched. Access to SCP-XXXX is restricted to Level 2 Personnel and above. All unscheduled research concerning SCP-XXXX must be approved by either the site director or two members of the current research team. Personnel handling SCP-XXXX must wear 10mm thick elbow-length chemical resistant gloves to avoid skin contact with SCP-XXXX-1.

Description: SCP-XXXX is a felt-tip permanent marker produced by the █Sharpie█ company. SCP-XXXX is 17cm long, 15.5cm when uncapped, with a 6.5cm cap. The ink contained within the marker, designated SCP-XXXX-1, is an anomalous black ink advertised on the marker casing as 'Extra Permanent'. When applied to a solid surface, SCP-XXXX-1 becomes impossible to remove by all tested chemical or frictional means (See Experiment Log XXXX-R). Chemical analysis reveals that SCP-XXXX-1 consists of Butanol, Propanol, Diacetone Alcohol, Ethanol, pigments, dyes, █Secret chemical█, and █Secret chemical█. research into synthesizing SCP-XXXX-1 is ongoing. Derivatives of SCP-XXXX-1 are currently being used by the foundation for ████████████████.

Experiment Log XXXX-R:

Removal Agent: Acetone
Marked Object: White Paper
SCP-XXXX is used to draw an 3cm wide circle onto a piece of white paper. After SCP-XXXX-1 has dried, acetone is applied to the marking via cotton swab for 1 minute. During the application process, residue of SCP-XXXX-1 was left on the cotton swab.
Results: No smudging, fading, or removal of SCP-XXXX-1 from the paper occurred as a result of the application of acetone in this test.

Test XXXX-RB: Sandpaper
SCP-XXXX is used to draw an 8x8cm square onto a